Favoritebikes Help Center

Search

How to Properly Install the FavoriteBikes light and Stem

How to Properly Install the FavoriteBikes light and  StemCapture.PNG

  1. Leave a Gap: Ensure there is a small gap both at the top and bottom of the stem. This prevents uneven angles and binding when tightening the screws.

  2. Loosen Screws in a Cross Pattern: Loosely tighten the four screws in a cross pattern. Do not over-tighten.

  3. Reinstall if Issues Arise: If you encounter any issues, remove the front light cover and reinstall it, ensuring that the gaps at the top and bottom are even. Repeat steps 1 and 2.

  4. Adjust Handlebar Angle: Find the most comfortable angle for the handlebar.

  5. Tighten Screws in a Cross Pattern: Once you have the handlebar at the desired angle, tighten the four screws in a cross pattern.

  6. Need Assistance? If you experience any problems, please contact our technical support team for help.