Install your eBike rear rack bag in a few simple steps. Follow our guide to secure your bag and enjoy hassle-free storage on your rides.
Favoritebikes pannier bag (rear rack bag) uses slider buckle straps like the ones in the image, follow these steps to install your bag on the rear rack:
-
Position the Bag: Place the rear rack bag on your eBike’s rack, ensuring it is centered and stable.
-
Thread the Strap Through the Slider Buckle:
- Start by feeding the end of the strap through the slider buckle.
- Pull the strap through the buckle, bringing it over the middle bar of the slider, and then thread it back down through the opposite side of the buckle. This creates a loop that allows you to adjust the strap length.
-
Loop the Strap Around the Rack:
- Take the loose end of the strap and loop it around the bars of your rear rack.
- Pull the end through the buckle again, securing it tightly by pulling the strap to the desired length. The slider buckle should hold the strap firmly in place.
-
Tighten the Straps: Once the straps are looped and threaded through the buckle, pull on the loose ends to tighten the straps. The slider buckle will lock the strap in place, ensuring the bag is securely attached to the rack.
-
Check for Security: Gently tug on the bag to make sure it is firmly attached and does not move or shift. If it does, adjust the slider buckle to tighten the straps further.
-
Easy Removal: To remove the bag, simply lift the slider buckle to release the tension, then unthread the strap from the buckle and the rack. This makes it easy to take the bag off whenever needed.