Please familiarize yourself with your button functions as illustrated in the figure below:
Ready? Let's begin.
Step 1:
For Firmware Version newer than 3.3 (Purchased in 2024 or later)
Double-click the M button. Next, press the M button to enter the basic settings menu.
For Firmware Version older than 3.3 (If it's below 3.3, make sure you have obtained your advanced passcode. You can find more information on how to do this in our related article.)
Ensure you have your advanced passcode at hand. To enter the settings menus, double-click the M button. Next, use the "-" button to navigate to the advanced settings. Press the M button to enter the advanced settings menu. Here, you'll be prompted to input the advanced passcode. Please enter it.
Step 2: Navigate to "Match new RFID card" and confirm by pressing the M button. The display will now require you to input the passcode that you set to power on the bike. If you haven't altered the original passcode, the default one should be 000000.
Step 3: You'll now see a prompt to pair your new RFID card. Simply position your new card over the Favorite Logo on the display. If the screen displays "success," your new key has been paired. Try testing your key fob. If it doesn't work, please repeat Steps 1-3.
I hope this guide is clear and helpful. If you have any further questions or need additional assistance, don't hesitate to contact our customer service.